Manual Vertical Lathe Machine C5116E-2
C5116E-2 Single-column vertical lathe series
This series of machines are used for various rough and finish turnings including internal and external cylindrical surface, conical surface, end face and grooving.
The work table uses dynamical pressure slide-way and NN30 dual cylinder roller bearing. It has features of high bearing capacity and revolving precision.
There are two vertical turret structure: T-ram, eight square ram.
Pentagonal tool slide is set on the vertical tool head, square tool slide is set on the side tool head.Both tool heads are balanced hydraulically.
The machine is controlled by PLC. With the DRO, with high reliability.
This machine has good shape and it is easy to operate.
The side tool head and the taper accessories are provided according to special demands.
Main technical parameter:
| Item | Unit | Model |
| C5116E-2 | ||
| Max. turning diameterTable diameterMax. height of workpiece
Max. weight of workpiece Work table speed range of table(16step) Tool holder range of feeds(12step)
Vertical tool holder ram travel Horizontal travel of side tool head Vertical travel of side tool head Max.turning diameter of side tool head Travel of beam Rapid traverse of tool head Swivel angle of vertical tool head Max.cutting force of vertical head Max. cutting force of side head Max. torque of table Height of tool bar section Power of main motor Overall dimensions of machine(L×W×H) Weight of machine |
mm
mm mm kg r/min
mm
mm mm mm mm mm m/min ±° kN kN kN.m mm kW mm kg |
1600
1400 1500 5000 5-160
0.8-86
1000/1250 630 980 1400 1250 1800 30 25 20 25 40 22/30 2800x3000x3660 14500 |
